Click image to view full size image
The wire rod production line employs continuous casting and rooling equipment from CONTINUUS-PROPERZI in Italy,equipped with Chinese 40-ton melting-holeding furnace,online degassing and filtering equipment and these equipments are advanced and withthe character of high-level automatic system. The products have advantages such as good roundness,good surface finish,uniform dimension and so on. Both the conductive and mechnical properties of products meet regulations of IEC and ASTM standards and products are widely used in electrical wire and cable industry.
1.It is mainly used for drawing the core of wires and cables
The surface of the rod is clean, smooth and seamless.
Coil weight: large coil 1000kg, small coil: 300--1000kg.
2. Certificate:Producing and providing the products according to Chinese standard GB/T3954-2001, and consulting and following the American standard ASTM B233:1997, and Germany DIN standard EN 17152:1997
3.The Type,Condition and Range
|
Type |
Condition |
Range(mm) |
|
A |
o |
Φ9-20 |
|
A2,A4,A6,A8 |
H/R |
The Mechanics and Electric Function
|
Type |
Tensile Strength (M pa) |
Percentage Elongation (%≥) |
Resistivity at 20°c (nΩ.m≤) |
|
A |
60-80 |
25 |
27.55 |
|
A2 |
80-100 |
12 |
27.85 |
|
A4 |
95-115 |
10 |
28.01 |
|
A6 |
110-130 |
8 |
28.01 |
|
A8 |
120-150 |
6 |
28.01 |
The Component of Material
|
Name of Element |
Si |
Fe |
Cu |
V+Ti+Mn+Cr |
Other |
Al |
|
Percentage % |
≤0.11 |
0.25 |
0.01 |
0.02 |
0.03 |
≥ 99.61 |